Whirlpool 940 series, Use And Care Manual

Page: 15 / 72

15
•
You can press Cancel/Drain again to
stop the drain immediately. Remember
to drain the dishwasher again before
starting a new cycle.
NOTE: A small amount of water remaining
in the dishwasher is normal.
Selecting cycle options
You can press an Option pad after the
dishwasher starts as long as the cycle is not
past the point that the option is used. For
example, you can press Air Dry any time
before the Drying indicator glows.
After a wash cycle, the dishwasher
remembers the options used and uses the
same options in the next wash cycle unless
new options are selected or the Cancel/
Drain pad is pressed.
High Temp Wash
When High Temp Wash is selected, the
dishwasher heats the water during
the main wash of the China/
Crystal, Low Energy, Normal , and
Heavy cycles. Heating the water
helps improve washing results.
The Pots-N-Pans cycle automatically uses
High Temp Wash.
Changing a cycle or an option setting
During the first minute of
a cycle
1. Press new Cycle and/or Option pads.
2. Check the detergent dispensers. They
must be filled properly for the new cycle.
After the first minute of a cycle
1. Press Cancel/Drain. A 2-minute drain
cycle starts. Wait for drain cycle to finish.
2. Press a new Cycle pad.
Low Energy Rinse
When Low Energy Rinse is selected,
the dishwasher does not heat
the water during the final rinse
of China/Crystal, Low Energy,
Normal, Heavy, and Pots-N-Pans
cycles.
NOTE: Low Energy Rinse saves energy, but
dishes take longer to dry and some spotting
can occur. For best rinsing and drying
results, use a liquid rinse agent.
Air Dry
When Air Dry is selected, the air in the
dishwasher is not heated during
the “dry” portion of a cycle. Using
Air Dry helps save energy, but
dishes take longer to dry and
some spotting can occur. Some
items (such as plastics) may need towel
drying. For best drying, use a liquid rinse
agent.
NOTE: The dishwasher automatically heats
the air in the dishwasher during the “dry”
portion of the cycle unless you select
Air Dry.
AIR DRY AIR DRY
LOW
ENERGY
RINSE
S E T T I N G T H E C O N T R O L S
HIGH
TEMP
WASH
NORMAL
LOW
ENERGY
HEAVY
POTS
-N-
PANS
HIGH HIGH
TEMP TEMP
WASH WASH
LOW LOW
ENERGY ENERGY
RINSE RINSE
AIR DRY AIR DRY
OPTIONS CYCLES
WASH WASH
LATER LATER
RINSE RINSE
CHINA CHINA
CRYSTAL CRYSTAL
3. If desired, press one or more Option pad(s).
4. Check the detergent dispensers. They
must be filled properly for the new cycle.
To clear the indicators:
Press Cancel/Drain before starting the
dishwasher to clear all cycle and option
selections.