background image

- ii -

WHIRLPOOL CORPORATION assumes no responsibility for any repairs made
on our products by anyone other than Authorized Service Technicians.

FORWARD

This Job Aid,  KitchenAid  “36

 and 48

 Island And Wall Canopy Range Hoods,” (Part No. 4317332),

provides the technician with information on servicing the Island And Wall Canopy Range Hoods.
It is to be used as a training Job Aid and Service Manual. For specific information on the model being
serviced, refer to the “Use and Care Guide”  provided with the hood.

The Wiring Diagrams used in this Job Aid are typical and should be used for training purposes only.
Always use the Wiring Diagram supplied with the product when servicing the unit.

GOALS AND OBJECTIVES

The goal of this Job Aid is to provide detailed information that will enable the service technician to
properly diagnose malfunctions and repair the KitchenAid Island And Wall Canopy Range Hoods.

The objectives of this Job Aid are to:

• Understand and follow proper safety precautions.
• Successfully troubleshoot and diagnose malfunctions.
• Successfully perform necessary repairs.
• Successfully return the range hood to its proper operational status.

Copyright © 2001, Whirlpool Corporation, Benton Harbor, MI  49022

Summary of Contents for 4317332





























Reviews: