8
Install air conditioner in window
1. Slide air conditioner onto support platform. Check to be sure
air conditioner side channel fits securely against vertical edge
of window frame.
NOTE: If air conditioner side channel does not fit securely
against window frame, remove air conditioner and readjust
leveling bolt.
2. Drill two
¹⁄₈
" holes through the window channel frame in
alignment with existing holes in bottom bar. Install two
³⁄₈
"
self-tapping screws through these holes.
NOTE: If window channel frame is not tall enough to use
existing holes, drill two new holes off to the side of the
existing holes to attach the air conditioner bottom bar to the
support platform. Air conditioner should be firmly anchored to
window channel frame or support platform.
Complete Installation
1. Place top retainer on top edge of filler panel, then place the
bottom edge of filler panel into groove of bottom retainer
(mounted on air conditioner). Filler panel may be trimmed
with knife or scissors to fit window height. Slide sliders
upward making sure filler panel aligns in sliders.
2. With sliders up against top retainer, drill
¹⁄₈
" hole through
window frame in alignment with existing hole in slider. Install
³⁄₈
" self-tapping screw in hole. Repeat for other slider.
3. Check all seals and plug all air leaks around air conditioner.
Use sealant to fill any minor openings.
4. Plug into a grounded 3 prong outlet.
5. Press RESET on the power supply cord plug.
A. Window channel frame
B.
³⁄₈
" self-tapping screw
C. Bottom bracket
D.
¹⁄₈
" drilled holes
A. Top retainer
B. Seal under top
retainer
C. Filler board
D. Slider
E. Seal between side of cabinet and sliding
sash (sliding window installation only)
F. Side channel
A
B
C
D
A
B
C
D
E
F
A.
¹⁄₈
" drilled hole
B.
³⁄₈
" self-tapping screw
A
B
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Do not use an extension cord.
Do not use an adapter.
Do not remove ground prong.
