VeriPulse IOS User Manual
47
NOTE:
Tips should not be placed in an ultrasonic cleaner or any cold
sterile solutions. The sterilant solutions will leave a sticky residue or film
on the mirror when drying.
WARNING:
Do not autoclave the handpiece of the device.
WARNING:
Do not remove the pouch before the sterilizer completes
its full dry cycle. If the pouch is wet or has any signs of moisture, this
can potentially leave water spots on the mirror which can affect image
quality during scanning.
WARNING:
Use extreme caution when cleaning the mirror as it is very
delicate and is prone to scratching.
7.3 Disposal
The VeriPulse IOS is an electrical device with electronic components inside and should be
disposed of in accordance with local environmental laws and regulations.
7.4 Calibration
The VeriPulse IOS is calibrated in the factory and therefore does not require calibration when
installed.
WARNING:
General prohibition indication. The functionality of the
system can be destroyed in the case of incorrect use. If unauthorized
changes have been made to the delivered system and accessories,
the warranty by Whip Mix becomes void. Whip Mix will not accept any
responsibility or liability for the improper functioning of the product in
such a case.
If the VeriPulse IOS begins to have problems scanning and recognizing teeth models, contact
Whip Mix Technical support team.
If the scanner cannot be recalibrated remotely, this may result in the system being returned
for repair/ calibration. See
Section 9 Support, Warranty and Repair Service for further info
.
