10
Pro Series
Furnace Operations Manual
Program
Printer
Port Door
Volume
Control
Adjusting Speaker volume
This feature allows you to adjust the volume of the
warning/alert speaker inside the furnace and the
display contrast.
1. Locate the door on the right side of the furnace.
Remove the two thumbscrews and the door.
2. With the door removed, a connector and one small blue
cube can be seen. The cube has a small screw near the
top.
3. Turn the screw on the blue cube to adjust volume.
This is a multi-turn potentiometer, so many revolutions
of the screw may be necessary. Counter-clockwise
will reduce the volume, clockwise will increase the
volume.
SELECT ITEM:
NITE MODE
Figure 3
READY, SELECT
MENU BUTTON?
Figure 2
Using the Furnace
After the furnace has completed the self-test at power
up, the Version screen appears. Press the
Next
button to
continue. The display should read:
Now you must select one of the menu selection buttons
on the left side of the front panel. To continue setting up
the furnace, press the
Special Functions
button and
the display will read:
Note
It is very important to set up the operating features of the
furnace before you attempt to program the furnace or
run programs.
For best results in learning to use your new furnace, follow
these steps in this order:
1. Set up the operating features of the furnace by reading
and following the instructions in
Chapter 2
—
Spe-
cial Functions
. This is
vERY IMPORTANT
because
these operating features will affect how you enter and
run
programs.
2. Learn to program the furnace by reading
Chapter 3 —
Change Program
. Enter a few of your own programs.
3. Read
Chapter 4 — Run Program
to understand how
to run programs and what features are available while
running a program.
15946 Pro Series English.indd 10
5/9/08 2:51:10 PM
