6
Instructions for Attaching Facebow Transfer Assembly
2. Place the transfer base assembly on
the lower member of the articulator and
secure it. (Figure 15)
Note:
Please refer to instructions in
articulator manual for adjustment
settings.
3. Insert the vertical rod of the transfer
assembly into the transfer base. Tighten
the clamp screw so that the vertical rod
fits securely in the transfer base.
(Figure 16)
4. Position the upper model into the bite
registration and mount the maxillary
model. (Figure 17)
Note:
Please refer to instructions
in articulator manual for mounting
mandibular models.
Direct Mounting of the
Maxillary Model
1. Slide the nasion relator assembly to the
patient’s left, away from the center of the
horizontal crossbar. Loosen the center
thumbscrew on the top of the facebow.
Continue to use the rubber band on
the facebow as it aids in manipulation.
(Figure 18)
Figure 15
Figure 16
Figure 17
Figure 18