2
Instructions for Attaching Facebow Transfer Assembly
Facebow Registration
Items needed for a facebow
registration
(Figure 1)
1. Facebow with nasion relator assembly,
transfer jig, and bitefork
2. Wax or bite registration material
3. Rubber band (optional)
Preparing Facebows
1. Clean and properly disinfect the plastic
ear pieces before each use. If replacing
them, make sure the hole on the flat
side of each is above the side arm, and
the plastic is seated until it touches the
shoulder of the arm.
2. Attach the transfer jig to the facebow
and tighten thumb screw on top.
(Figure 2 and 3)
3. A rubber band may be easily positioned
on the facebow to aid in its manipulation.
(Figure 4)
Note:
The nasion relator assembly
moves left and right along the crossbar,
and the facebow caliper design allows
the arms to move equal distances during
the opening and closing motions.
Figure 1
Figure 2
Figure 3
Figure 4