Whip Mix AquaSpense, User Manual

Page: 9 / 16

7
6. Remove the bowl from the scale and place the desired powder into
the bowl.
7. Return the bowl to the scale
8. Press the Start button.
The dispenser will begin to dispense the liquids separately, beginning
with water and finishing with special liquid. The display will indicate when
the program is finished and the unit will beep until the bowl is removed
from the scale.
Note: If the dispenser tries to dispense from either side for 30 seconds
(15 seconds for the water only unit) and the weight on the scale does not
increase, it will give an error. Usually this means it is out of water, special
liquid or the special liquid hose may be clogged (see Maintenance
section on page 9 for more details). Due to set time we suggest that the
failed batch be thrown away. Refill the empty bottle and then re-run the
program with fresh investment or stone.
SPECIAL FUNCTIONS MENU
Calibration:
The scale arrives calibrated from the factory. The calibration information
is stored in the scale, so changing scales will not necessitate a
recalibration. The scale should rarely, if ever, need to be calibrated.
1. Obtain a 500 g to 1200 g known weight. If needed, weigh an object
on a separate scale in order to calibrate the dispenser.
2. Be sure the rubber scale cover is clean.
3. Press the Menu button.
4. Use the or arrow buttons to select Special Functions.
5. Press the Enter button.
6. Use the or arrow buttons to select Calibration.
7. Press the Enter button. The display will read “Enter Password” (The
password is 250).
8. To enter the password use the or buttons to select 2 as the
first digit.
9. Press the button.
10. Use the or buttons to select 5 as the second digit.
11. Press the button twice.
12. Use the arrow buttons in the same fashion to enter the weight of
the object being used for calibration.
13. Press the button.
14. Place the weight on the scale.
15. Press the Enter button.