Whip Mix AquaSpense, User Manual

Page: 8 / 16

6
8. Use the or buttons to enter the total liquid required (in mL) and
powder (in grams). Note: Total liquid required is total volume of
both water and special liquid in mL.
9. Use the or buttons to indicate the special liquid concentration.
This is the percent of the special liquid only to be dispensed. 0%
dispenses only water, 100% dispenses only special liquid. You will
not be required to enter the percent of water (i.e. if you enter 80%
special liquid concentration, the unit assumes 20% water).
10. Press the Enter button.
11. The screen should display Program Saved.
PROGRAMMING THE AQUASPENSE (WATER ONLY)
1. Press the Menu button.
2. Use the arrow buttons to select Add Program.
3. Press the Enter button.
4. Use the or buttons to select a program number (1-15).
5. Press the Enter button.
6. Use the or buttons to select the numbers or letters to name the
program. Press the button to advance to the next position. Press
the button to move back to the previous space.
7. Once the name is complete, press the Enter button to move to the
next screen.
8. Use the or buttons to enter the amount of powder (in grams).
9. Press the Enter button.
10. Use the or buttons to indicate the amount of water to dispense
per the given powder weight above.
11. Press the Enter button.
12. The screen should display Program Saved.
RUNNING A PROGRAM
Before running a program, check that the special liquid hose end is not
clogged and will allow special liquid to flow (see the Maintenance section
on page 9 for more details).
From the Main Menu:
1. Use the or buttons and select Run Program.
2. Press the Enter button.
3. Use the or buttons to select the number of the program you
wish to run (1-15).
4. Place an empty bowl on the scale.
5. Press the Tare button.