___________________________________________________________________________
Infrastructure Installation Guide
___________________________________________________________________________ 13
Location Sensor Installation Guide
D0405 rev PA6
Copyright WhereNet, Corp. 2001
WhereNet Confidential
Figure 7
RJ cable tool
Figure 8
Fluke LAN CableMeter
5
CONFIGURATION
The Location Sensor (Location Access Point) must be configured prior to
operation. Configuration includes:
•
Setting the Location Sensor configuration, including the IP address
•
Setting the embedded Access Point configuration (LAP-4200 only),
including the Service Set Identifier (ESS ID), and IP address.
Failure to configure the Location Sensor prior to operation may result in an
inoperative unit.
____________
Note
____________
