background image

P83857 H 

Sheet 3 of 4 

MOUNTING OPTIONS: 

 

Figure A.  1/2" PIPE MOUNTS 

 

Figure B.  BACKBOX MOUNT 

STROBE LENS

LENS GASKET

STROBE BASE  

WBB BACKBOX

1/2" CONDUIT PIPE

TEFLON TAPE  

 

 

4"SQ. X 1-1/2" DEEP BACKBOX

STROBE LENS

LENS GASKET

STROBE BASE

NEOPRENE GASKET

 

 

Figure C.  SURFACE MOUNT 

 

Figure D.  FLANGE MOUNT 

STROBE LENS

STROBE BASE

NEOPRENE GASKET

LENS GASKET

 

 

FLANGE RING

NEOPRENE GASKET

STROBE LENS

 

 

NOTE

: For  Pipe mounting, either mounting option in Figure A is recommended. 

 

MAINTENANCE: 

 

TROUBLE SHOOTING 

 

If the strobe fails to operate make sure the correct voltage is being supplied to the strobe leads.  If the unit still fails to operate 
call Wheelock Customer Service/Tech Support at (800) 631-2148. 

 

NOTE

:  No field repairs other than lens and steady-light replacements are recommended.  Steady-light lamps are 7C7 type for the 

AC-MAXS and 2470X type for the DC-MAXS. 

 

Steady light lamps for the Series AC-MAXS and Series DC-MAXS are warranted only for 6 months and require replacements as 
part of routine maintenance.  Replacements lamps can be purchased through and electronics parts distributor. 

 

ORDERING OPTIONS: 

Lenses may be ordered separately under the following order codes. 

 

Table 2. 

Component Order 

Code 

Clear Lens 

MAX - C 

Amber Lens 

MAX - A 

Red Lens 

MAX - R 

Blue Lens 

MAX - B 

WARNING:  THE MAX INDUSTRIAL STROBES ARE NOT TO BE USED AS AN INDOOR VISUAL EVACUATION 

APPLIANCE FOR THE HEARING IMPAIRED. 

WARNING:  A SMALL POSSIBILITY EXISTS THAT THE USE OF MULTIPLE STROBES WITHIN A PERSON'S FIELD OF 

VIEW, UNDER CERTAIN CIRCUMSTANCES, MIGHT INDUCE A PHOTO-SENSITIVE RESPONSE IN PERSONS WITH 
EPILEPSY.  STROBE REFLECTIONS IN A GLASS OR MIRRORED SURFACE MIGHT ALSO INDUCE SUCH A RESPONSE.  
TO MINIMIZE THIS POSSIBLE HAZARD, WHEELOCK STRONGLY RECOMMENDS THAT THE STROBES INSTALLED 
SHOULD NOT PRESENT A COMPOSITE FLASH RATE IN THE FIELD OF VIEW WHICH EXCEEDS FIVE (5) Hz AT THE 
OPERATING VOLTAGE OF THE STROBES.  WHEELOCK ALSO STRONGLY RECOMMENDS THAT THE INTENSITY AND 
COMPOSITE FLASH RATE OF INSTALLED STROBES COMPLY WITH LEVELS ESTABLISHED BY APPLICABLE LAWS, 
STANDARDS, REGULATIONS, CODES AND GUIDELINES. 

Summary of Contents for AC-MAX-A

Page 1: ...ile the AC MAXS and DC MAXS models offer a steady light feature along with the strobe operation All models are available with either clear amber red or blue lens color NOTE All CAUTIONS and WARNINGS are identified by the symbol All warnings are printed in bold capital letters WARNING READ THESE INSTRUCTIONS CAREFULLY FAILURE TO COMPLY WITH ANY OF THE FOLLOWING INSTRUCTIONS CAUTIONS AND WARNINGS CO...

Page 2: ...asket in place against the strobe base If the strobe is to be mounted to a weather resistant backbox use the gasket supplied with the backbox Make the wiring connections as outlined in the wiring section Neatly tuck the wiring connections into the backbox and position the strobe over the mounting surface Use four 8 32 x 1 screws customer supplied to fasten the strobe to the backbox for weather res...

Page 3: ...6 months and require replacements as part of routine maintenance Replacements lamps can be purchased through and electronics parts distributor ORDERING OPTIONS Lenses may be ordered separately under the following order codes Table 2 Component Order Code Clear Lens MAX C Amber Lens MAX A Red Lens MAX R Blue Lens MAX B WARNING THE MAX INDUSTRIAL STROBES ARE NOT TO BE USED AS AN INDOOR VISUAL EVACUAT...

Page 4: ...ICULAR PURPOSE OR ANY OTHER MATTER USERS ARE SOLELY RESPONSIBLE FOR DETERMINING WHETHER A PRODUCT IS SUITABLE FOR THE USER S PURPOSES OR WHETHER IT WILL ACHIEVE THE USER S INTENDED RESULTS THERE IS NO WARRANTY AGAINST DAMAGE RESULTING FROM MISAPPLICATION IMPROPER SPECIFICATION ABUSE ACCIDENT OR OTHER OPERATING CONDITIONS BEYOND WHEELOCK S CONTROL SOME WHEELOCK PRODUCTS CONTAIN SOFTWARE WITH RESPEC...

Reviews: