20
Troubleshooting
Troubleshooting the Television Function
• Ensure the monitor has the television feature (included on the 18-inch monitors only).
• Ensure the cable is connected. The connection is found on the front-left base of the Paramill.
Troubleshooting the Wi-Fi Function
• Ensure Wi-Fi is set to “On” in the
Setup screen. (See the Adjusting Settings section for details.)
• Ensure there is an available Wi-Fi signal in the facility.
• Ensure the monitor antenna is connected.
Troubleshooting Other Issues
Call Wheelers’ Paramill Customer Service at 1.855.727.2645 for troubleshooting the following
scenarios or if there are additional concerns not covered in this manual.
Scenario
Description
Calibration
Your Paramill has been factory calibrated and should not require further
attention. Call customer service in the event that
• you do not feel resistance, or
• the resistance is the same at various settings.
Software or
Connection
Issues
Your Paramill is equipped with a software package that enables error messages
to be displayed in the event of an issue. Call customer service for help or to
inquire about the error messages.
Unexpected
Sounds
Call customer service if you experience any unexpected sounds with your
Paramill.
Summary of Contents for Enduro II
Page 4: ......
Page 6: ......
Page 30: ...info wheelersparamill com www wheelersparamill com 855 PARAMILL 855 727 2645 ...
