VEHICLE IDENTIFICATION NUMBER (VIN) LOCATIONS
Vehicle identification numbers are used to identify your new tractor and
major attachments. These numbers should always be referred to when consulting
dealer or factory concerning service, parts, or other information you may require.
If these plates are removed during repair operations, they should always be
replaced.
Tractor vehicle identification number plate is located just below seat on
rear fender.
Engine identification numbers are located on engine shrouding and indicate
model, specification or type number and serial number of tractors engine.
Major attachments also have a vehicle identification number plate attached
to them.
For your convenience and ready reference, enter tractor and engine numbers
below.
200-Series VIN Location
300, 400-Series VIN Location
Tractor Identification Number
Engine Identification Number
Model
Type or Spec No.
Serial No.
OWNER REGISTRATION AND WARRANTY
Service and warranty assurance is as important to Wheel Horse as it is to
you, the owner. To facilitate warranty service at an Authorized Wheel Horse
Dealer, Wheel Horse requires factory registration. A registration card is supplied
with each new rider and attachment.
Either you or your' dea ler must fill in the
required information and mail the card to Wheel Horse.
The Wheel Horse limited Warranty Statement is on a "hang tag" attached
to each product. This statement describes what items are covered by the Wheel
Horse limited Warranty, your rights and obligations, a'nd the procedure to
follow to obtain warranty service. Please familiarize yourself with the warranty
statement.
All of us at Wheel Horse want you to b e satisfied with your Wheel
Horse riding mower; pleas e don't hesitate to contact us for assistance.
PARTS MANUAL
A separate parts manual is available for your Whee! Horse equipment.
To obtain a parts manual, see the ordering information found at the end of this
publication.
BE SURE TO INCLUDE THE VEHICLE IDENTIFICATION NUMBER OF THE
EQUIPMENT.
- 2 -
www.MyWheelHorse.com
