2 1 1 ·5, 2 1 1·6
Models:
On 1 1 HP engine, air is drawn
from inside to outside of filter element. When check
ing filter, be sure to inspect inside of element to deterw
mine jf it needs replacement.
Wipe off air cleaner cover(s) and backing plate,
taking care to prevent any dirt from entering car
buretor.
3001 400 Series: Dry type air filter element is clean
ed by tapping it lightly on a flat surface to remove
loose dirt particles. Replace element if dirt does not
drop off easily. DO NOT wash elements in liquid. Do
not attempt to blow dirt off with compressed air as
this can puncture filter element.
Foam precleaners are used over filter elements on
some engines. Clean preclean.er at 25 hour intervals,
when air cleaner is serviced. Wash precleaner in a
solution of liquid dishwashing detergent and water.
Squeeze out excess water and allow it to dry. Sat
u rate precleaner in engine oi" then squeeze out ex
cess oil and install precleaner on element.
P R E C L E A N E R
D R Y T Y P E E L E M E N T
I
N U T
S P A C E R
30B·Series
Air Cleaner
PRE CLEANER'
, NOT USED ON ALL MODELS
3 1 0, 3 1 2, 414, 416, 41 7·Series
Air Cleaner (Typical)
208.3, 2 1 1·3
Mod els:
To service foam air filter, re
move two screws and lift off complete air cleaner
assembly. Remove screen and spacers from foam
element and remove element from body of air cleaner.
Wash foam element in a solution of liquid deter
gent and water. Wrap foam in a clean cloth and
squeeze dry. Saturate element i n clean " engine all and
squeeze to remove excess oil.
Reassemble air cleaner and reinstall on carburetor.
Be sure gaskets are in good condition and in place.
When assembling, make certain lip of foam element
extends over edge of air cleaner body. Foam element
will form a protective seal.
Spacers
CARBURETOR
AIR INTAKE
TO CUTOUT IN
BLOWER HOUSING
208·3
Air Cleaner
ELEMENT /
I I
BODY
21 1·3
Air Cleaner
- 1 6 -
www.MyWheelHorse.com
