page 3 – 25
E-6 / Dec 2007
M A S T E R P A N E L
Line box is checked, when the fader is off the Bus Minus output will be fed from
the PGM D bus instead.
STUDIO MUTES—Input channels can be programmed to mute the various moni-
tors when the channel is ON. There are five STUDIO MUTES checkboxes, one for
each monitor section plus one for CUE. The checked boxes show which speakers
are muted.
STUDIO TALLIES—Turning the channel ON can activate a remote tally indicator.
There are four tally control lines. The checked boxes show which tallies are activated.
This requires additional configuration in XPoint or Navigator to fully implement the
feature.
BUS MINUS DIRECT OUT—For each signal, determines if the Bus Minus output
is a mix-minus of the selected BUS MINUS SOURCE (unchecked) or is a Direct
Output (checked). On signals where the BUS MINUS DIRECT OUT box is checked,
the PGM D Off Line box (above) will have no effect.
BUS MINUS SOURCE—For each signal, determines which bus the Bus Minus
output is a mix-minus of. Any of the four PGM busses, the four MIX MINUS bus
-
ses, or the four AUX busses can be selected as Bus Minus Source. If, for example,
E1PgmA is selected, then the BUS MINUS output will consist of the audio on the
E1PgmA bus, minus the signal assigned to the fader. This is true when the fader is
turned on. It also true when the fader is turned off, unless the PGM D Off Line box
is checked (above). This setting will have no effect on any signal where the BUS
MINUS DIRECT OUT box is checked (above).
page 3 – 24a
E-6 / Aug 2012
