M A S T E R P A N E L
page 3 – 3
E-6 / Dec 2007
Master Panel (MNE-6)
Controls and Functions
The E-6 digital audio control surface is equipped with one MASTER panel.
This panel contains numerous controls, including INPUT SOURCE select,
PAN, CUE, and AUX SEND controls,
MXM ASSIGN buttons, HDPN MODE
buttons, TIMER CONTROL buttons, 14
PROGRAMMABLE buttons, and four
MONITOR sections with buttons to select
MIX MINUS, AUX SEND and PRO-
GRAM sources, plus two additional EXT
(programmable) sources, as well as level
controls. Add to that separate TB buttons
for each MXM, each AUX SEND, and both
STUDIO monitors, a group of 9 switches to
deal with various operational modes, and a
mouse pad with two buttons to aid in navi-
gating the VGA screen.
PAN Control
The PAN knob acts as a panpot in
MONO, LEFT only,
and RIGHT only
modes, and as a bal-
ance control in STE-
REO mode. This
feature is activated
for a given channel
by pressing and holding the channel’s A/B
button. To easily set the PAN to center, you
can press the control twice in rapid succes-
sion, like double-clicking a mouse button.
You may also adjust PAN by clicking and
dragging the PAN position indicator on the
Input Tab.
INPUT SOURCE Knob
The INPUT SOURCE knob serves two
primary functions: As a
Source signal selector for
fader strips or as a DSP
parameter value control-
ler when the Input EQ or
Dynamics screens are se-
lected.
E-6 / June 2010
