page 3 – 23
E-6 / Dec 2007
M A S T E R P A N E L
VDIP Settings
Many surface functions, such as Mute, Tally,
and Machine Start Pulsed, are programmed from
the VDIP Screen. VDip settings are attributes of
the Source signal and will follow the signal onto
different faders of the same console or even other
surfaces, depending on how it is programmed. You
may configure VDip from the E-6 directly or by
using the VDip dialog box in XPoint soft
-
ware. It is convenient to configure VDip
right on the E-6, but you may have to use
XPoint if you have other surface models.
To configure VDip DEFAULT on the
E-6 press the Options tab and choose VDIP
Settings from the AVAILABLE OPTIONS
scroll down list and then check the func-
tions that will be same for ALL signals.
To configure VDip for a particular
source on the E-6, first make sure that the
source you need to program with VDip is
assigned to an input fader. Press and hold
the fader’s A/B button and the
Input Tab
will open to the last screen used. Select
VDip from the Button Bar at the bottom.
E-6 / July 2012
