Wheatstone Corporation D-7, Technical Manual, Page: 72 / 92

D y n a m i c s P r o c e s s i n g C o n t r o l G U I
page 8 – 3
D-7 / Nov 2006
Using the GUI
Multiple processing screens allow full control of 4-Band Parametric
Equalizer, Expansion/Compression, and Input settings. Each screen has a
Title Bar, a Control Area, the Dynamics Displays, the Side Bar buttons, and
the Channel buttons. First choose the channel by clicking the appropriate
button on the bottom of the monitor display. Alternatively, you can press
the desired channel’s SET button to bring that channel’s settings up on the
screen. Clicking a Side Bar button on the right side of the monitor display
brings the respective management screen (its name shown in the title bar
window) and gains access to the controls for that portion of the signal
processing.
To operate the controls and faders in the Control Area, click on the
control, and slide the mouse to move the control - up increases the control’s
indicated position, down decreases it.
Visually, the most important element on the main screen, dominating
the lower half of it, is a large graphical display; the standard audio
frequency of 20Hz – 20kHz is ranged in logarithmic form across this graph
with gradations at salient frequencies. The vertical axis scale range is
-15dB - +15dB, with gradations every 3dB.
On the right bottom side of the monitor screen there are a number of
bargraph level meters that indicate average signal levels of elements in the
signal path:
CHANNEL BUTTONS
CONTROL
AREA
SIDE BAR
DYNAMIC
DISPLAYS
TITLE BAR