Wheatstone Corporation AUDIOARTS ENGINEERING DMX Series Manual Download Page 2 | Manualshive

Page: 2 / 63

background image

2

Publication Information

©2020 Wheatstone Corporation

Wheatstone considers this document and its contents to be proprietary and confidential. Except for making a reasonable number of copies for your own
internal use, you may not reproduce this publication, or any part thereof, in any form, by any method, for any purpose, or in any language other than English
without the written consent of Wheatstone Corporation. All other uses are illegal.

This publication is designed to assist in the installation and use of the product as it exists on the date of publication of this manual and may not reflect the
product at the current time or an unknown time in the future. This publication does not in any way warrant description accuracy or guarantee the use for the
product to which it refers.

Wheatstone reserves the right, without notice, to make such changes in equipment, design, specifications, components, or documentation, as progress may
warrant, improving the performance of the product.

Trademarks

Product names and other appropriate trademarks, e.g. WheatNet-IP

™,

VoxPro

®

, and Vorsis

™

are registered trademarks of Wheatstone Corporation or its

subsidiaries. Microsoft

®

and Windows

®

are registered trademarks of Microsoft Corporation. All other trademarks and trade names are the property of their

respective companies.

Customer Service Contact Information

Wheatstone

600 Industrial Drive

New Bern, NC 28562 USA

For technical support, including on-site service, general product training, repair and parts, contact Wheatstone through our webpage (

www.wheatstone.com),

through email at [email protected], or by phone (+01 252-638-7000).

Manual Revisions

A = Initial release, October 2017

B = technical corrections, IP Navigator additions, operational clarifications, October 2017

C = Appendix A on networking multiple consoles added; some technical corrections; consolidated software app info into chapter 3, July 2018

D = Added info on a new feature: saving/loading EQ Configuration files (DMX Surface Setup, build 1.0.29 and later), September 2018

D.1 = Added info about saving two Studio EXT selections, October 2018

D.2 = Changed exclamation point graphic to display properly in a PDF, October 2018

E = Clarified note on using mono signals on the Razor along with other minor changes and clarifications. January 2019

F = Updated manual with Audioarts Engineering logo and new DMX Setup & support for WNIP Navigator, January 2020

«
1
2
3
4
...
»

Summary of Contents for AUDIOARTS ENGINEERING DMX Series
































































Reviews:

No comments

Related manuals for AUDIOARTS ENGINEERING DMX Series

Brand: Palmer Pages: 60

Brand: Ruhle Pages: 19

Brand: Tascam Pages: 40

Brand: Omcan Pages: 40

Brand: WAHL James Martin Pages: 12

Brand: Cloud Pages: 20

Brand: Tascam Pages: 164

Brand: RAM Pages: 19

Brand: Kasanova Pages: 42

Brand: Kambrook Pages: 20

Brand: AEG Pages: 16

HM 310 Assistent

Brand: AEG Pages: 48

Brand: API Pages: 16

Deja’Vibe MDV-3

Brand: Fulltone Pages: 2

Brand: Ibiza sound Pages: 21

Brand: Ibanez Pages: 2

Brand: Skytec Pages: 13

Brand: Centurion Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands