This product supports all CE-
marking criteria. The declaration
of conformity certificate can be
obtained from WHD.
WHD are members of the INTERSEROH association.
We participate in the dual system as well as other
industry-specific solutions. Therefore, plastic, metal
and electronic parts can all be recycled.
Version
(Technical and optical
modifications reserved)
25.06.2020
- Page 2 -
Installation and setting
Step 4.
Adjust the volume of the devices with a mini Phillips
screwdriverwhen necessary.
Note:
the volume of the devices has been adjusted before leav-
ing the factory.
Step 3.
Connect the internal unit to the switching power supply
and plug in. The Intercom Kit measures itself briefly on the envi-
ronment and is then ready for use.
Step 5.
The external unit for the customer (VBE10) comes with an
included infrared sensor that activates the microphone, if a
person at a distance from about 80-100cm ist detected.
The IR sensor can be deactivated / reactivated by pressing
the reset button using a needle like object. The red LED will
turn on/off during this process.
Step 1.
Connect the internal unit and the external unit with the
cable supplied.
Contents of package
Manual VoiceBridge Set
Applicable for 111-020-04-200-02
VBI10 (voice bridge internal)
VBE10 (voice bridge external)
Thank you for buying our Voice Bridge Intercom Kit.
Please read this manual carefully, especially the safety and security information.
Operation
Step 2.
Tear off the protection paper on the back of the units,
and then put the devices to the right position (as close as pos-
sible to the speaker) and press them tightly.
E-Mail:
Web:
www.whd.de
WHD - Wilhelm Huber+Söhne GmbH+Co.KG
Bismarckstr. 19
D-78652 Deißlingen
S49 74 20 / 8 89-0
Fax +49 74 20 / 8 89-51
