3
1. Left tripod and tripod connecting rod assembly:
loosen the screws, connect the tripod rod to the
left tripod, tighten it properly, as shown in the
picture below.
4. Supporting rod assembly: loosen the screws for
the left tripod supporting rod hole, insert the
supporting rod, tighten the screws properly.
ATTENTION!
Be sure to insert the longer part of the
supporting rod (which has a longer length from
the end ring). Incorrect assembly will reduce the
effectiveness of the damper.
2. Pedal and tripod connecting rod assembly:
loosen the pedal screws with the Allen key,
insert the connecting rod into the pedal
mounting hole, tighten it properly.
3. Right tripod assembly: please repeat step 1
(above), as shown in the picture below.
FRAME CONSTRUCTION
Summary of Contents for TUBULAR BELLS
Page 1: ...TUBULARBELLS SETUPGUIDE...
