3-11
220 Dauntless
Section 3 • Systems & Components Overview & Operation
R
Raw Water System (Optional)
There is a raw water fitting included in the Fishing
Package Option and the Livewell Option. The fitting
is located on the starboard side of the motorwell
below the ventilation screen. The 3.5 GPM (13 LPM)
raw water pump is used to supply seawater to the
deck fitting. The fitting allows for connection of a
common garden hose. There is a cap that is tethered
to the fitting and should be on the connection when
it is not in use.
Operation
The optional Livewell and raw-water washdown use
the same pump. The seacock for the pump must be
in the OPEN position before using. The seacock can
be accessed through the lower center opening of the
Maintenance
Maintenance of the raw water system will require
you to check the fittings and hoses for system
integrity to prevent leaks. The system should be run
at least every other month to keep the pumps
impellers in good condition. Clean the seacock intake
of any debris or build-up when the boat is in drydock
or trailered.
NOTICE
The seacock MUST be in the OPEN position.
Running the pump dry may cause damage to
the unit.
Raw Water Inlet (Optional)
Fig. 3.11.2
aft sterndeck The “HELMSEAT LIVEWELL”
switch on the instrument panel controls pump
operation.
Raw Water System (Optional)
Fig. 3.11.1
1
2
RAW WATER INLET
MOTORWELL
1
2
1
2
RAW WATER PUMP
TO DECK FITTING
500 GPH (1893 LPH) SEACOCK PUMP
SEACOCK
3
4
1
2
3
4
Your 220 Dauntless may be fitted with a 12 Gal.
(45.42L) freshwater tank. The freshwater system
includes: Pump, plumbing, holding tank and
connections for water service to the shower located
on the starboard side of the aft cockpit.
Fresh Water System (Optional)
• Be sure to fill the water tank from a source
known to provide safe, pure drinking water.
• If you do not use the freshwater system for
long periods of time or only use it seasonally
it is recommended that you follow the
disinfecting practice before using it.
NOTICE
FWD
