20
Assembly Instructions
21.
Now, go back and tighten all Cam Locks and Screws. Make sure that all the parts are tight and there are
no gaps between the pieces. This will help keep the unit square.
22.
Flip over the unit on its front edges. Lay the Back Panel (D) to the back edges of the assembled unit.
Make sure that the overlaps on the panels are even all the way around. Attach the Back Panel (D) in
place with the 15 mm
Washer Head
Screws
(11).
NOTE: We recommend attaching the back panel with the screws at the corners first.
M3.5 x 15 mm Washer Head Screw
(24 used in this step)
⑪
D
D
11
F
