3
3. TO THE USER
4. TO THE FITTER
5. PRINCIPLES OF OPERATION
6. APPLICATION
7. WARNINGS
List of diagrams
Fig 1 Straight Housing - Complete product Fig 10 Angled Housing - Tighten screws
Fig 2 Straight Housing - Width and height
Fig 11 Angled Housing - Screw covers
Fig 3 Straight Housing - Drill hole
Fig 12 Angled Housing - Insert hose
Fig 4a Straight Housing - Insert housing
Fig 13a Plumbing - Mixer models
Fig 4b Straight Housing - Secure locking nut Fig 13b Fitting plumbing – Mixer models
Fig 5 Straight Housing - Insert hose
Fig 14 Plumbing and hose installed
Fig 6 Angled Housing - Complete product
Fig 15 Plumbing connection - Cold models
Fig 7 Angled Housing - Width and height
Fig 16 Maintenance - mixer models
Fig 8 Angled Housing - Drill hole
Fig 17 Operation - Removing handset
Fig 9 Angled Housing - Insert housing
Fig 18 Operation - Twist handset
Read the following carefully before installation
WARNING:
Please note that incorrect installation may invalidate the warranty.
Check that the product is suitable for the intended application, follow installation
instructions and ensure all relevant personnel read the points listed below. Also ensure
that these installation instructions are passed on to the end user.
The Whale Twist® Deck Shower has a unique innovative handset with temperature
�������������������������������������������
lines of the boat deck. All Whale Twist® models require only a single circular hole to be
cut and simple plumbing to install.
The Whale T�������������������������������������
surfaces on the deck or transom of recreational marine vessels or vehicles. If it
is intended for use for any other purpose or with any other liquid, it is the user’s
responsibility to ensure that the shower is suitable for the intended use and, in
particular, that the materials are fully compatible with the liquids to be used.
Temperature Settings – To prevent scalding (regardless of the water
heating method or the control devices used), the temperature for the hot
water supplied to the faucets and showers should be controlled in the
range of 43 ºC to 60 ºC (110 º F to 140 º F) with a fail safe set at 82 ºC
(180 ºF).
Summary of Contents for Twist DS0003B
Page 1: ......
