Tiptoe Pump
Mk4 GP1309
Also Service Kits/Assemblies: AK1304, AS1305, AS1306
Installation
Choose an installation
where the pump can be
operated comfortably.
1. Cut a 3" (75 mm) diam-
eter hole in the floor.
2. Floor thickness: minimum
3
/
8
" (10 mm), maximum 2"
(50 mm).
3. One piece assembly fits
directly onto floor.
4. Secure with 3 screws.
Operation:
1. Release plunger plate by
twisting anti-clockwise. 2.
Pump up and down with
your foot; vigorously for full
flow, gently for controlled
flow.
3. When pumping is fin-
ished, push the plunger fully
down, twist clockwise to
lock.
Maintenance
Regular inspection of valves
and seals is recommended
with cleaning and replace-
ment of components as
necessary.
Replacement parts are
available in service kits and
assemblies from dealers or
direct from the manufac-
turer.
Note:
For winter storage,
ensure that the pump is
drained completely to avoid
frost damage.
Helpful hints
a) The pump can be serv-
iced using Service Kit
AK1304 which contains the
complete set of washers for
the Mk3 and Mk4 pump.
b) If the pump is slow to
prime, the cup washer may
be worn or valves are not
seating properly. Check and
replace these if necessary
using Service Kit AK1304.
c) If the pump will not pump:
- check that the suction line
is in the water.
- check that the hose con-
nections are secure and
there are no air leaks.
- check the washers in the
pump, they may need to be
replaced.
- if the outlet is an on/off
faucet or tap, make sure
that it is open to allow water
to flow.
d) If the pump is leaking, it is
likely that the gland washer
is worn. A replacement for
this part is contained in
Service Kit AK1304.
Read carefully before
installation and use.
To the Fitter:
Check that
the product is suitable for
the intended application,
follow installation instruc-
tions and ensure operating
instructions are passed on
to the end user.
To the User:
Read the
following instructions care-
fully.
Application:
This product is designed for
use as a fresh water foot
pump in caravans and
boats. Use for any other
purpose or with any other
liquid, is not recommended
and is entirely at the user's
risk.
The Whale Tiptoe can be
used as a manual back-up
with an electric pump
provided that:
1. It is not a pressurized
system.
2. It is placed between the
in-line electric pump and the
water supply.
Elegance
Single
Faucet
In-Line
Booster
Pump
991
In- Lin e
Boos ter
Pum p
991
3"
(76 mm)
3
/
8
" (10 mm)
6
5
/
16
"
160 m
m
Outlet port
Inlet port
