background image

5

AUTO DETECT

This product includes the exclusive “Auto-detect” feature for the charging of batteries.  With 
this new technology, the power converter will evaluate the charging cycle of a battery, determine 
the type of battery being used, and then choose the appropriate charging program(profile) to 
provide for the best performance and maintenance of that battery. 
Because of the differences of Lead Acid, AGM and Lithium type batteries, a system that  
provides a charge to the battery or batteries must be able to accommodate the different 
charging requirements. With the use of the “Auto-detect” product, the charging requirement 
is able to be “detected” and is then automatically set for the type of battery being used.  For 
standard Lead Acid and AGM batteries, WFCO power converters still use the Three-Stage Smart 
Charging to effectively maximize battery life by monitoring through the different phases of the 
charge cycle.  On the other hand, Lithium batteries will prefer the use of only two stages when 
charging, and therefore the power converter will charge using the WFCO Two-Stage Smart 
Charging system.

LEAD ACID & AGM THREE-STAGE SMART CHARGING 

In order to maximize battery life for lead acid and AGM, it is best to charge batteries 
slowly, keep them topped off with a trickle-charge when the RV is not being used. The 3-Stage 
“smart” charger continuously measures the battery voltage output and regulates the amount of 
charge using three modes of operation; Absorption, Bulk and Float modes. 
All WFCO power converters are automatic three-stage switching power supplies. The converter 
senses which mode it needs to be in by checking the RV system voltage.

ABSORPTION MODE

The converter normally provides a constant target output voltage of 13.6 VDC (nominal) to  
power all the branch circuits. However, it is current limited, and if the output (load) current 
reaches its maximum, the output voltage will drop as necessary to hold the 

converter’s maximum 

output current level (the Amperage rating) without exceeding it. 

Figure 1

DC FUSE BOARD

OPERATIONAL FEATURES

Summary of Contents for WF-9500-AD-MBA Series















Reviews: