Instructions for Use Neonatal Intensive Care System VARIOTHERM REA-KCE
D 2002_01.doc
18/39
Use
Bassinet with wall system
Bring the bassinet into the desired position by means of the foot pedals
1
of the height adjustment facility.
Cover the gel pad
2
with a thin nappy. Make sure that the nappy is not squeezed between the walls and
that it cannot block the locking system. The front and side walls
4
must always close smoothly and latch
securely. The safety walls
3
must be inserted in a way that the infant cannot fall from the bassinet. For
better accessibility they can be taken out of their support and inserted again set off by 180°. Thus the walls
are retracted into the bassinet, allowing full access to the patient.
Drainage tubes are conveyed through and the open corners of the front wall, ventilation tubes can be
connected in level position through the tube guidings in the rear wall.
When the under pad heating has reached the steady temperature, place the patient inside the bassinet.
Take care that the walls are folded up so that the patient cannot fall from the bassinet. Take care that no
body parts, tubes and cables are squeezed. After unlocking the tilting device
5
incline the bassinet to the
desired position.
2
.
3
4
1
5
