WD-18CW
Rev. (202211)
Technical specifications
49
* Other pressures available on request
** Other voltages on request
* At lower pressures, the machine should be supplemented with a break tank
* Including packaging
** Delivery in 2 parts. If necessary, delivered in smaller components.
CONNECTION, STEAM-HEATED MACHINE 150–250 kPa *
Total connected load (kW)
4.5
Main fuse 400-415 V 3N~(A) **
20
Max. connection area 400-415V 3N~ (L1-L3, N, PE) (TN-S) Cu (mm²)
35
Maximum short-circuit current Icu (kA)
10
Steam connection (internal thread)
R1¼"
Condensing water connection (internal thread)
R¾"
WATER, DRAIN AND VENTILATION CONNECTIONS
Water quality, hardness (°dH)
2–7
Cold water connection 5-12°C (internal thread)
R¾"
Hot water connection 50-65°C (internal thread)
R¾"
Compressed air 600kPa (internal thread)
R½
Waste pipe connection, PP pipe (ø mm)
50
Water capacity, cold water, pressure (kPa) *
300
Water capacity, cold water, flow (litres/minute)
30
Water capacity, hot water, min./max. pressure (kPa)
100 / 600
Floor drain, capacity (litres/sec.)
3
Ventilation, connection (ø mm)
160
Heat load to room, latent / sensible / total (kW)
4.5 / 6.5 / 11
SIZE AND WEIGHT FOR TRANSPORT *
Overall machine size (LxWxH) (m)
2.6 x 2.0 x 2.75
Overall machine weight (kg)
1350
Size part 1 (LxWxH) (m) **
2.6 x 2.0 x 2.25
Size part 2 (LxWxH) (m) **
2.2 x 2.0 x 0.8
Weight part 1 (kg) **
850
Weight part 2 (kg) **
580
Summary of Contents for WD-18CW
Page 2: ......
