WD-18CW
Rev. (202211)
Operating instructions
29
4.1.4
Preparations before filling
In this chapter, figures are given in brackets from the figure beneath chapter 4.1.1
Machine design.
Check:
•
that the machine and removable parts have been cleaned. If not – clean
them!
•
that the rubber sleeve (20) is not damaged.
•
that removable parts are correctly in place (19, 20, 22).
•
the drain tap (11) must be closed.
•
the amount of detergent and drying agent.
•
that the stopcock for the water to the machine is open.
•
that the main switch is in the ON position. When the main switch is set to
the ON position, it will take up to 25 seconds before the ON/OFF button
(24) illuminates blue and the machine switches to standby mode.
Remember:
•
Ordinary washing-up liquid must not be used in the machine or for soaking.
Contact your detergent supplier regarding the choice of a suitable
detergent. Washing-up liquid causes a build-up of foam, produces poor
wash results and can damage the machine.
•
Steel wool must not be used for pre-treating the dishware.
•
Only detergent and drying agent intended for industrial machines may be
used.
•
Use the same make and type of detergent and drying agent.
Medium wash program
without spin dry
Medium wash program
with spin dry
Spin dry
Menu
Return / Back
Symbol
Explanation
Symbol
Explanation
Summary of Contents for WD-18CW
Page 2: ......
