Chapter 6 Pairing & Others
PAIRING (MATCHING) INSTALLATION
1. The VW-5 is already supplied paired (matched) from the factory.
2. If needed users can also pair manually using the following steps:
Supply power to and switch on both WV-5TX and VW-5RX
Connect the IR remote control cable to the back of the WV-5TX
Position the units so the IR cable LED head from the VW-5TX is directed in
front of the IR receiver window of the VW-5RX
Then press the pairing button at the rear of the VW-5TX for at least 2 sec.
The VW-5TX sends an authorization code to the VW-5RX and when this
configuration data is confirmed over the IR link the pairing is complete.
OTHERS
Product Dimensions: 220(w) x 150(d) x 45(h) mm
Power Adaptor:
Input: AC100~240V 50/60Hz 1.0A
Output:
DC12V
2.5A
Operation Temp:
0~40 deg C
This product is for indoor use only.
29
