Rugged Computing
Users Manual Rugged Table PCs
10
CHAPTER 1 GETTING STARTED
This chapter guides you to get the Rugged Tablet PC ready for operating.
1.1
Connecting the AC Power
Our tablet PC can operate either on the external AC power adapter or internal
battery power. It is suggested that you use AC power when you start up the
tablet PC first time.
**Caution
Use only the AC adapter included with your tablet PC. Using other AC adapters
may damage the tablet PC.
1. Plug the DC cord of the AC adapter to the power connector of the tablet PC.
2. Plug the female end of the AC power cord to the AC adapter and the male end to
the power electrical outlet.
3. When the AC adapter is connected, the Battery Pack is also under charging. You
can check the Battery Status LED indicator to see the currently progress. The
indicator turns to green when is fully charged.
(For information on using battery power, see
“
Chapter 3 The Power Management
”
)
**Caution
When you disconnect the AC adapter, disconnect from the electrical outlet first
and then from the tablet PC. A reverse procedure may damage the AC adapter
or the tablet PC.
When unplugging the connector, always hold the plug head. Never pull on the
cord.
Summary of Contents for ID97
Page 9: ...Rugged Computing Users Manual Rugged Table PCs 9 CHAPTER 1 Getting Started ...
Page 34: ...Rugged Computing Users Manual Rugged Table PCs 34 CHAPTER 3 Tablet PC Power Management ...
Page 39: ...Rugged Computing Users Manual Rugged Table PCs 39 CHAPTER 4 Expanding Your Tablet PC ...
Page 42: ...Rugged Computing Users Manual Rugged Table PCs 42 1 CPU Configuration 2 Thermal Configuration ...
