VII
Convector Heater
Intended Use
The convector heater is designed for heating up small rooms as main heater or as
auxiliary heater. Only use the heater indoors and operate it with the footplates
and castors firmly mounted. The heater is not intended for outdoor use.
Before first Use
Remove all parts from the packaging. Keep packaging material out of reach of
children. There is risk of suffocation!
Turn the heater upside down.
Remove the 4 wing nuts from the threads at the bottom of the heater.
Insert the footplates with castors (5) on the threads and firmly fasten the wing
nuts again.
Turn the heater upright on the castors.
Place the heater on a level and solid surface.
Lock the brakes of the castors (see image on the right).
Completely unroll the power cord.
Connect the power cord to a grounded power outlet. The
heater is ready to use now.
Operation
The convector heater offers an adjustable thermostat (3) and a 5-stage heating
stage switch (4).
Set the heating stage switch to the position
OFF
to switch off the heater.
In stage one that is indicated by one circle , the heater delivers the lowest
heating output. In stage four that is indicated by four circles , the heater
delivers the highest heating output. Turn the heating stage switch to the
desired stage.
Turn the thermostat knob (3) clockwise to the highest setting
H
. As soon as
the desired room temperature has been reached, turn the thermostat knob
counter clockwise until you notice a click sound. This way, the heater will be
switched on and off automatically. The desired room temperature is
maintained.
Turn the thermostat knob clockwise in order to reach a higher room
temperature.
