6
Using
Inserting the Batteries
Transmitter
1. Slide the battery compartment lid out of the unit
and insert a 9 volt battery pack of the type 6LR61
into the compartment.
2. Close the battery compartment lid until it locks
visibly and audibly.
Receiver
1. Open the battery compartment lid as mentioned
before and insert two batteries of the type 1.5 V
LR6 (AA) into the compartment. Observe correct
polarity.
2. Close the battery compartment lid correctly.
Mounting Hints
The transmitter and the receiver have a slotted
hang hole on the back side of the housing in order
to hook the units on the wall.
Use suitable screws and leave a gap of three 3 mm
between the screw head and the wall, so the
housing can be easily inserted into the hang hole.
Please note: If you mount the transmitter on any metal
surface or some plastic (UPVC) materials the
operating range will be seriously reduced.
Using
1. Press the transmitter push button in order to activate the ring
tone. After pressing the push button the receiver will ring 2
times.
