17
Operating
Code Correspondence between remote control and socket. Switch
settings 1 – 4 of the socket comply with the coding of the ON/OFF
buttons 1 – 4 on the remote control.
DIP switches A – F on the remote control comply with the coding of
the sockets F – A.
Changing the Coding
Please note that this remote control set operate in a frequency band
also used by many other wireless applications. If you want to
change the coding of your remote control set, due to interferences
from other remote control units in your neighbourhood that
unintentionally switch on your appliances, proceed as follows:
1. Disconnect the remote-controlled sockets from power mains.
2. Unscrew the cover from the sockets and open the battery
compartment lid of the remote control.
3. Change the receive channels according to the below mentioned
drawing. To change the factory-made coding, slide one or
several DIP switches upwards. Please observe the below hints:
A B C D E F
F E D C B A
