manualshive.com logo in svg

Westwood V230D, Operator'S Manual, Page: 15 / 28

Share
Download
Westwood V230D Operator'S Manual Download Page 15

Page 13

Routine Maintenance

PTO Main Drive Belt

The PTO drive belt is self-tensioning when the drive 
is engaged. If this belt does require any adjustment 
it should be carried out by your dealer; anyone not 
familiar with this setting may cause serious damage 
or even injury when using a machine with badly 
adjusted belts.

Accessory Drive Belt installation

  

(Figs. 35 & 36)

  1.  Lift the PTO Guard.

  2.  Place the drive belt over the PTO pulley of the 

Powered Grass Collector. 

  3.  Feed the belt around the PTO pulley  

clockwise. 

  4.  Lock the Locating Lever over the Lift Arm 

Lugs. 

  5.  Check Belt Tension (19mm deflection 2kgs 

pressure).

  6.  Rotate the locking clips over the Locating 

Lugs.

If the belt tension is incorrect, movement of the 
sweeper Locking Levers on the threaded rod can 
adjust it. Ensure the lock nuts are suitably tightened 
after adjustment. Belt tension should be set in the 
working position.

 

 

  

 

 

 

           

fig. 34

fig. 35

fig. 36

Summary of Contents for V230D





























Reviews:

No comments