-2-
NOTE:
It is IMPORTANT TO FOLLOW ALL of the
manufacturers instructions for the grinder that will
be used. Failure to do so may cause injury!
1. Place the
Auger
, spline end first, into the
Juicer Head
(Figure A).
2. Align the tabs on the
Screen
with the
notches in the opening on the
Juicer Head
.
Place the
Screen
onto the
Auger
.
3. Align the tabs on the
Adjuster Cap
with
the notches in the opening on the
Juicer
Head
. Place the
Adjuster Cap
onto the
Auger
(Figure B). Twist the
Adjuster Cap
counter-clockwise to lock the
Adjuster Cap
on
the
Juicer Head
.
4. Align the tabs on the
Cap
with the notches
on the
Adjuster Cap
. Twist the
Cap
counter-
clockwise to lock the
Cap
onto the
Adjuster
Cap
.
5. The
Juicer Atachment
is now assembled
(Figure C).
6. Align the splines on the
Juicer Attachment
with the tabs on the motor unit (Figure D).
7. Press the
Juicer Attachment
against the
motor unit and rotate it counterclockwise until it
locks into place.
8. The
Juicer Atachment
is now ready for
use (Figure D).
9. Place the grinder tray
(supplied with
the grinder)
into the throat of the
Juicer
Attachment
.
CAUTION!
ALWAYS
use the
stomper
(supplied with the grinder)
to push
food into the
Juicer Attachmnet
.
NEVER
push food with hands.
ASSEMBLY INSTRUCTIONS
FIGURE A
NOTE:
It is IMPORTANT TO FOLLOW ALL of the
manufacturers instructions for the grinder that will be used.
Failure to do so may cause injury!
1. Turn on the grinder.
2. Place the food that will be juiced into the throat of
the
Juicer Attachment
(Figure E).
3. Gently push the food into the
Juicer Attachment
using the stomper.
CAUTION!
ALWAYS
use the
stomper to push food into the
Juicer Attachment
.
NEVER
push food with hands.
4. As the food is processed, the juice will come out
of the bottom
Chute
and any skin and seeds will come
out of the
Cap
. Place a bowl under the bottom
Chute
and a bowl under the
Cap
to catch the juice and the
pulp.
CAUTION!
NEVER
reach into the
Juicer
Head
.
HELPFUL HINTS:
Rerun the skin and seeds through
the
Juicer Attachment
to extract any leftover pulp &
juice. Repeat as necessary.
NOTE:
Twist the
Cap
to control the amount of
moisture in the pulp. The
Adjuster Cap
is marked “0”,
“1” or “2”. Be careful not to loosen the
Cap
from the
Adjuster Cap
and the assembled
Juicer Attachment
(Figure F).
USING THE JUICER ATTACHMENT
WARNING!
Before cleaning, assembling or disassembling the grinder,
make sure the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE!
ALWAYS unplug the grinder when not in use.
FIGURE E
Stomper
RECIPES
Cap
-3-
Adjuster
Cap
Screen
Auger
Juicer
Head
FIGURE C
Auger
Splines
FIGURE B
Adjuster
Cap
(Back)
Screen
Auger
Juicer
Head
Tabs
Notches
FIGURE D
Splines
Assembled
Juicer
Attachment
Motor
Unit
Juicer
Attachment
Grinder
Tray
Stomper
Bottom
Chute
Cap
LARGE BATCH ITALIAN TOMATO SAUCE
1/2 cup olive oil
3 medium onions,
chopped
2 cloves garlic,
minced
3 Tbsp brown sugar
1 Tbsp dried oregano
4 tsp salt
2 tsp dried basil
1 tsp black pepper
12 cups fresh tomato puree
• Heat the olive oil in a large pan
• Sauté the onions and garlic until tender, do not overly brown
• Add the rest of the ingredients
• Bring mixture to a boil, reduce heat and simmer partially covered for 2 hours or until
sauce has reduced to desired consistency
• Stir occasionally
• Serve or allow to cool then refrigerate or freeze
• Ingredients like sliced mushrooms, cooked/drained sausage, hamburger,
etc. can be added to taste
FIGURE F
Cap
Adjuster Cap
