1. Make sure the suction cup base and table
surface are clean and dry.
2. With the handle end facing the base, secure
the drum housing by sliding the bottom of the
drum housing through the guides in the suction
cup base.
FIGURE 3
3. Twist the base lock on the suction cup base
to secure the suction cup base.
FIGURE 4
4. Attach the handle to the back of the drum
housing and push until it “clicks” into place.
FIGURE 5
5. Insert the drum blade into the drum housing
and hold the handle in place while turning the
drum clockwise to lock.
FIGURE 6
ASSEMBLY INSTRUCTIONS
1. Place a bowl in front of the drum housing
to catch your shredded/sliced food.
2. Cut your food into small pieces to fit into
the top of the drum housing - do not overfill.
3. Turn the handle clockwise and use the
stomper to push food against the drum
blades. Note: With any grater, you may notice
that the drum becomes “clogged.” If your
grated food clogs in the drum, stop turning the
handle and use a utensil to safely remove the
clog.
CAUTION! DO NOT INSERT FINGERS
INTHE GRATER HOUSING! ALWAYS USE
THE STOMPER FOR SAFETY! EXERCISE
CAUTION WHEN HANDLING BLADES.
USING THE DRUM SHREDDER/SLICER
ENGLISH INSTRUCTIONS
6
FIGURE 4
FIGURE 5
FIGURE 6
Summary of Contents for 16-0250-W
Page 15: ......
