background image

1

IMPORTANT SAFETY INSTRUCTIONS

This electrical appliance must always be used according to the following
safety instructions. 
Save these instructions as this manual contains important safety and
operating information.

When using an electrical appliance, basic precautions should always be
followed, including the following:

READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS APPLIANCE

1. Read all instructions before using this Heater.
2. This Heater is hot when in use. To avoid burns, do not let bare skin

touch hot surfaces. Use grip handle when provided.

3. Keep combustible materials such as drapes, furniture, pillows, bedding,

paper, clothes, and curtains at least three (3) feet (0.9m) from the front
of Heater and away from its sides and rear.

4. Extreme caution is necessary when any Heater is used by or near

children, invalids or pets and whenever the Heater is left in operation 
and unattended.

5. Always unplug Heater when not in use. To disconnect the Heater, turn

controls OFF first, then remove the plug from the outlet.

6. Do not operate any Heater with a damaged cord or plug, or after the

Heater malfunctions, or has been dropped or damaged in any manner.
Return Heater to manufacturer for examination, electrical or mechanical
adjustment, or repair. (See Warranty for information.)

7. Do not use outdoors.
8. This product is not to be used in bathrooms, laundry areas, or other

similar indoor locations. Never locate Heater where it may fall into a
bathtub or other water container.

9. Do not run cord under carpeting. Do not cover cord with throw rugs,

runners or the like. Arrange cord away from area where it will not be
tripped over.

10. Do not insert or allow foreign objects to enter any ventilation or exhaust

opening as this may cause electric shock or fire, or damage the Heater.

Summary of Contents for WST6003











Reviews: