background image

11. To prevent a possible fire, do not block air intakes or exhaust in any

manner. Do not use on soft surfaces, like a bed, where openings may
become blocked. Use the Heater on flat, dry surfaces only.

12. A Heater has hot and arcing or sparking parts inside. Do not use it in

areas where gasoline, paint, or flammable liquids are used or stored.

13. Use this Heater only as directed in this manual, Any other use not

recommended by the manufacturer may cause fire, electric shock, or
injury to persons.

14. Avoid the use of an extension cord because the extension cord may

overheat and cause risk of fire. However, if you must use an extension
cord, the cord shall be #14 AWG minimum size and rated not less than
1875 watts.

15. If the Heater will not operate: See specific instructions on Auto Safety

Shut Off. 

16. Do not place the Heater on an uneven or small surface which might

allow it to tip or fall.

17. Do not operate the Heater with Heater Guards removed.
18. The Heater must be 12 inches (300mm) distance away from the wall or

other objects.  

19. This Heater includes a visual alarm to warn that parts of the Heater are

getting excessively hot. If the alarm flashes, immediately turn the Heater
OFF and inspect for any objects on or adjacent to the Heater that may
cause high temperatures. 

DO NOT OPERATE THE HEATER WITH THE RED

SAFETY LIGHT FLASHING . 

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

2

Summary of Contents for WST6003











Reviews: