Westinghouse WP2500, Owner'S Manual, Page: 49 / 110

49
TROUBLESHOOTING
PROBLEM POTENTIAL CAUSE SOLUTION
No or low pressure. 1. Water supply is low. 1. Increase the water supply.
2. Nozzle is obstructed. 2. Clean the nozzle.
3. Water fi lter screen is obstructed. 3. Remove and clean the fi lter.
4. Water inlet is obstructed. 4. Clear the inlet.
5. Inlet hose is kinked or leaks. 5. Straighten the inlet hose and
repair leaks.
6. High-pressure hose is obstructed or
leaks.
6. Clear obstructions in the hose
or replace the hose.
7. High-pressure hose fi tting leaks. 7. Tighten the fi tting. Apply
sealant tape if necessary.
8. If trying 1-7 above does not solve
the problem, the cause might be
that the pressure washer has a fault.
8. Take the pressure washer to
your nearest authorized service
dealer.
Soap does not mix with water spray. 1. Soap siphon hose is not
submerged.
1. Insert the soap siphon
hose properly into the soap
container.
2. Soap siphon hose is obstructed. 2. Clear obstructions in the soap
siphon hose.