Westinghouse WP2500, Owner'S Manual, Page: 35 / 110

35
OPERATION
RINSING
!
WARNING
Always apply the trigger lock to change
a nozzle if the engine is running.
1. Select the desired nozzle and change nozzle. See
Selecting Nozzles on page 33 .
2. Squeeze the trigger and carefully start to spray,
keeping nozzle a safe distance from the cleaning
surface.
3. Starting from the top of the surface, spray a small
area then check surface for damage. If no damage,
continue rinsing by using overlapping strokes
working down the surface. Keep checking surface
for damage while rinsing.
CLEANING SOAP SIPHON
HOSE
If used, clean the soap siphon hose before stopping the
engine.
1. If necessary, install the soap nozzle (black).
2. Use clean water to fl ush the soap siphon hose.
Submerge the soap siphon hose in the clean water.
3. Flush the soap siphon hose for 1 – 2 minutes while
the engine is running.
4. Once clean, stop the engine.
5. Point spray gun in a safe direction. Squeeze the
trigger to release pressure within the system.