Step 1:
Using the wall mount bracket as a template mark the four screw holes where you plan to install the radiator.
Step 2:
Place the radiator with the mounting bracket on the four marks and tighten four screws (not included).
Step 3
Once installed, you can adjust the heater to the desired angle.
3. OPERATION
MAKE SURE THE HEATER IS NOT FUNCTIONING BEFORE YOU HANG IT ON A GAZEBO, OR UNDERNEATH A BALCONY
OR A ROOF.
NOTE:
Wait until the heater’s heating element
has cooled down before moving it.
REMEMBER:
Portable electric heaters are designed for spot heating or as a supplementary heat source. They are not
intended to be the main source of heat during cold months.
Caution:
You must always make sure that there is at least 9.8
” (
25 cm) of empty space above the heater, 5.9
” (
15 cm)
from the side and 5’ (1.8 m) below the heater.
Control Panel
Activation button
Summary of Contents for WES31-1892
Page 1: ......
