![Westinghouse PDR790 Owner'S Manual Download Page 15](http://html1.mh-extra.com/html/westinghouse/pdr790/pdr790_owners-manual_965268015.webp)
28
29
CATALYIC LINERS
CATALYIC LINERS
warning
Do not lift the door by the handle� Rough handling will cause
glass to break�
Removing the oven door
Your oven is equipped with a door that can be disassembled
in order to clean all the panes of glass� Remove the door
before cleaning�
• Open the door fully to access the hinges then rotate the
‘stirrups’ (highlighted in the image) on both hinges fully
towards the oven�
• Slowly close the oven door until it is stops against the
‘stirrups’ (about 45
O
)�
• Grasp the oven door with a hand each side of the door
and remove it from the oven by pulling it towards you�
• Lay the oven door with the outer side facing downwards
on something soft and flat (for example a blanket on a
kitchen table) to prevent scratches�
Removing oven door top trim
• Take hold of the grid embossed sections of the door
trim at each end and press inwards to release the clips�
Remove the door trim by pulling it towards you�
Removing door glass panels
warning
Rough handling, especially around the edges can cause the
glass to break�
• Lift the black bordered glass panel out of the guide.
• Repeat this for the smaller clear glass panel
(when fitted)�
Cleaning door glass panels
warning
Do not to use harsh abrasives on the glass panes as the
reflective surface plays a role in the function of the oven.
Do not place glass in dishwasher� Hand wash only with a
soft cloth and warm soapy water� When dry polish with a
soft cloth and ensure the glass is dry before reassembly�
Bottom trim (on selected models)
• The bottom trim may be removed for cleaning by
snapping out and lifting away from the glass�
Re-assembling bottom trim
• Push down to “snap” each side of bottom trim back into
door columns�
Re-assembling door glass panels
• Insert the smaller clear glass panel (when fitted) first from
above and at an angle to the profile of the door�
• Repeat for the black bordered glass panel ensuring the
painted surface is facing to the downside�