14
5
BLENDER OPERATION:
1. Before turning the blender on, make sure the blender base is placed on a flat, dry surface and the power cord
is plugged into an 120V AC electrical outlet.
2. Make sure the blender jar is properly positioned on the base.
3. Add the required ingredients to the blender jar. If you are blending both liquid and solid ingredients, liquid
ingredients should be added first. This will allow you to use the tick marks on the blender jar as liquid volume
measurement guides if desired. It also provides more consistent blending and reduces the stress placed on
the motor. Solid ingredients can be added by dropping them through the lid with the detachable cap removed.
NEVER PUT YOUR HANDS IN THE BLENDER JAR WHILE THE BLENDER IS PLUGGED IN.
4. Small amounts of liquid ingredients can be measured in the detachable cap, which holds up to two fluid
ounces and has tick marks for measuring smaller amounts.
5. Always place the lid on the blender jar before blending.
BEFORE FIRST USE
Caution: Use extreme care when handling the Blade Assembly. Do not touch blades with your fingers.
The blades are very sharp and can cause injury if touched.
1. Carefully unpack the Blender.
2. Wash the Container, Lid Cap and Blade Assembly in warm, soapy water. Rinse and dry thoroughly.
3. Clean the Blender Base with a moistened cloth.
DO NOT IMMERSE THE BASE IN WATER
.
INSTRUCTIONS FOR USE
Note: Before each use make sure blender is unplugged.
ASSEMBLY
CAUTION: Use extreme care when handling the Blade Assembly. Do not touch the Blades with your
fingers. The Blades are very sharp and can cause injury if touched
.
1. Place the Blender Base on a clean, dry and sturdy surface.
2. Place the Blade Assembly in the Retaining Ring, and fit the Rubber
Gasket over the Blade Assembly as shown in the figure.
3. With the blades and gasket inside the Retaining Ring, hold the jar over
the ring and turn the ring counter clockwise onto the bottom of the jar.
The gasket should lie flat between the balde assembly and the bottom of
the jar. Make sure the retaining ring is firmly screwed onto the bottom of
the jar; otherwise it may come loose while the motor is on.
4. Place the jar onto the blender base carefully, making sure it is firmly seated. Use a gently rocking motion if
necessary - do not twist.
5. Attach the transparent cap to the plastic blender lid with a one-quarter turning motion.
6. Plug the blender cord into a 120 volt AC electrical outlet. You are now ready to operate your blender.
Cocomocha
Coconut Telegraph
Coco-Nuts
Coffee Chiller
Coffee Smoothie
Cognac Freeze
Cool Kiss
Creamsicle
Creamsiclov
Crush
D-E
Daiquiri-Banana
Daiquiri-Banana 2
Daiquiri-Banana 3
Daiquiri-Basic
Daiquiri-Calypso
Daiquiri-Cherry
Daiquiri-Choconana
Daiquiri-Fruit
Daiquiri-Kiwi
Daiquiri-Mango
Daiquiri-Melon
Daiquiri-Peach
Daiquiri-Pineapple
Daiquiri-Spicy
Daiquiri-Strwb
Daiquiri-Strwb 2
Daiquiri-Strwb EZ
Daiquiri-Tropical
Dreamsicle
Dreamsicle 2
Emily’s Eclipse
F-J
Frosty Colada
Frozen Matador
Fruit Bang
Fry’s Fun
Fuzziwuzzi
Fuzzy Navel
Georgia Peach
Golden Cadillac
Golden Dream
Grand Creamsicle
Grasshopper
Grizzly
Guava Comfort
Hammer
Horny Bull
Hummer
Hurricane
Irish Coffee
Jamaican Jane
Jamaican Rum Punch
K-M
Kahlua Sin
Koala Bear
Lavender Sunset
Libation Nation
Margarita-Fruit
Margarita-Mango
Margarita-Original
Margarita-Snappy
Margarita-Strwb
Margarita-Sunrise
Marg-Cinco de Mayo
Marg-Creamsicle
Marg-Limeberry
Marg-Strwb Extra
Marg-Watermelon
Mean Green
Miami Ice
Midori Colada
Mint Chip
Moonchaser
Mount Fuji
Muddy Moyer
Mudslide
N-R
Noreaster
Oxana
P. B. Shake
Painkiller
Panda Bear
Passion Shake
Peaches n’ Cream
Peaches n’ Honey
Pina Colada
Rach III
Rainbow Crush
Razzamatazz
Red Wine Blend
Riviera Raspberry
Roadrunner
Root Beer Float
Root Beer Float 2
Rum Nut
S-Z
Sangria-Raspberry
Sex Van
Sexicle
Sharkbite
Siberian Cocktail
Slater’s Spice
Snow Storm
Snowball
Son of a Peach
Spiced Java
Strawberry Colada
Strawberry Slurry
Strawberry Smash
Strawberry Whip
Strwb Smoothie
Swimming Pool
Swirl
Tequila Blizzard
Tequila Orange
Trinidad
Tropicrush
Tutti Frutti
