6
13
6.
PRESS THE ON SWITCH
on the blender base. The corresponding indicator light will glow and the Recipe Screen LCD will
display the message Welcome to Westinghouse Intelliblend for several seconds before fading to the next screen, which is
the main recipe menu. For instructions on searching for recipes, see the USING THE RECIPE SCREEN section of this
manual. For basic blender operation, using the Recipe Screen LCD is not necessary. The LCD is programmed to turn
itself off automatically if no blender buttons are pushed for 10 minutes, but the blender’s power will remain on.
7.
TO START BLENDING
, press and release the desired speed function button. The corresponding indicator light will glow
and blending will begin. To switch between blending speeds at any time, simply press a different speed button.
8.
TO STOP BLENDING
, press the activated speed button again. The corresponding light will turn off and blending will stop.
The ON button will continue glowing to let you know that the blender’s power is still activated. Blending can be reinitiated
at any time by simply pressing another speed button (or pressing the same button again).
The recipe screen will remain on
after any database button is pressed and time out after 10 minutes.
9. You can also stop blending by pressing the OFF button. In this case, all blending power will be turned off
and blending cannot begin again until you activate the unit by pressing the ON button.
When you press the OFF
button, the recipe screen will turn off immediately.
10.
PULSE mode
allows you to create a quick burst of power for fast, efficient blending. You can pulse blend at any
speed. For pulse blending, turn the blender ON and press the PULSE button. The PULSE light will flash. Then press
the desired blending speed function button and hold it down for as long as you would like pulse blending to continue.
Blending will continue at that speed until you release the button. Repeat as desired in PULSE mode, the blender will
operate only when you are pressing a speed button, allowing you to determine the length of each pulse. Pulse
blending is useful when you want to blend only for very limited intervals for breaking apart large pieces of food, for
example, or for precise control of food texture. To exit pulse mode, simply press the PULSE button again and the
PULSE light will stop flashing.
11.
CRUSHING ICE.
Add 1 cup of ice cubes, about 9, to the Blending Jar. Place the Lid on Blending Jar then repeatedly
press and release the Ice Crush button until the cubes are reduced.
12. When you are finished blending, turn the blender off by pressing the OFF button. Remove the plug from the electrical
outlet, and lift the blender jar off the blender base. Lift straight up, using a gentle rocking motion if necessary. Do not use
a twisting motion.
NEVER REMOVE THE BLENDER JAR WHILE THE MOTOR IS ON.
13. To dislodge food, use a rubber or plastic spatula to loosen food lodged around the blade assembly.
DO NOT INSERT
SPATULA UNTIL BLENDER IS TURNED OFF AND UNPLUGGED.
Be sure spatula is not in jar when you resume blending.
CLEANING YOUR BLENDER
:
A
lways unplug your Intelliblend Blender from electrical outlet before cleaning any part of it.
1. Remove blender jar from blender base.
2. Remove retaining ring from bottom of blender jar.
3. Set the blade assembly rubber gasket and retaining ring aside.
HANDLE BLADE ASSEMBLY CAREFULLY. BLADES ARE SHARP!
4. Wash the jar, lid and cap in warm, soapy water and rinse and dry it thoroughly before the next use. They can
also be washed in a dishwasher if you prefer.
5. Wash the retaining ring, blade assembly and gasket by hand in warm, soapy water. Do not soak.
DO NOT PLACE THE
BLADE ASSEMBLY IN THE DISHWASHER.
Always handle the blade assembly with extra caution when washing. Make
sure the retaining ring, blade assembly and gasket are dried thoroughly before the next use.
6. To clean the blender base and LCD screen, use a damp sponge or cloth to remove any residue. Stubborn
stains can be removed with a mild, non-abrasive cleaner. Dry carefully before next use.
NEVER IMMERSE THE
BLENDER BASE IN WATER.
LIST OF COCKTAIL RECIPES:
Below is an alphabetical list of the cocktail recipes stored in the
IntelliBLEND
database. These can be searched for by name.
Note that when searching for certain types of cocktails by name, such as daiquiris or margaritas, you should search under
the generic cocktail term rather than the specific flavor (e.g., search for Daiquiri-Pineapple rather than Pineapple Daiquiri):
A-B
Amore
Andy’s Choice
Apricocia
April Fool
Bahama-Mama
Bailey’s Subst
Banana Berry
Banana Colada
Banana Popsicle
Banana Sandwich
Banana-Nut
Bellini Extra
Berryhill Bobby V
Bloody Sorbet
Blue Hawaiian
Blue Lou
Blue Whale
Blueberry Freeze
Bomba Colada
Brandy Alexander
Bushwhacker
C
Campari Grapefruit
Campari Orange
Canary
Carnegie Melon
Chambord Colada
Cherry Brandy
Cherry Vanilla
Chestnut Frost
Chi Chi
Choco Colada
Choconado
Choconana
Choo-Choo
OPTIONAL
OUNCE(S)
PLAIN
POWDER(ED)
QUART(S)
RASPBERRY
SCOOP(S)
SEPARATED
SMALL
STRAWBERRY
SUBSTITUTE
SWEETENED
TABLESPOON(S)
TEASPOON(S)
TEMPERATURE
UNSWEETENED
VANILLA
WITH
WHITE
OPT
OZ
PL
PWD
QT
RASPB
SCP
SEPD
SM
STRWB
SUBST
SWEETD
TBS
TSP TEASPOON(S)
TEMP
UNSWEETD
VANL
W/
WHT
AND
BOYSENBERRY
BETWEEN
CUP
CHOCOLATE
CONCENTRATE
CONDENSED
CREAM
DISSOLVED
EVAPORATED
EXTRACT
GROUND
HOUR(S)
INGREDIENT(S)
INSTANT
JUICE
LARGE
LIQUOR
MEDIUM
MINUTE(S)
&
BOYSB
B/T
C
CHOC
CONC
COND
CRM
DISLVD
EVAP
EXT
GRD
HR[S]
INGRD[S]
INST
JC
LG
LIQR
MED
MIN
Abbreviation
Meaning
Abbreviation
Meaning
ABBREVIATIONS USED ON RECIPE SCREEN:
