10
C O O K I N G W I T H Y O U R T I M E R
2-hour “Auto Off” timer
The 2-hour timer features an automatic oven "cut off". This means
that a cooking period of up to 120 minutes can be set. When the
timer has counted back to "Auto Off" a bell will sound and the
oven will automatically switch off.
Once automatic baking is
complete, return to manual operation by setting the timer
to the 'OFF' mark.
NOTE:
It is not recommended to use this timer for short durations
(e.g. boiling eggs).
O P E R AT I N G T H E E L E C T R O N I C C L O C K
E l e c t r o n i c C l o c k
Touch Control
General features
Your touch control clock has the following features:
• Timer – allows you to set a countdown time that will beep
when the set time has elapsed.
• Cooking duration – You can set a cooking duration. A timer will count down the preset cooking
time, beep when the time has elapsed and turn the oven off.
• End cooking time – you can set a cooking finish time. A timer will count down the preset
cooking time, beep when the finish time has been reached and turn the oven off.
• Delayed start cooking time – You can combine the cooking time and stop cooking time to
switch the oven on and off at a specific time during the day.
Note:
Your touch control clock only operates with your main oven.
Setting the time of day
You must set the time of day before you can operate your appliance. When power is supplied to
your oven “12.00“ will be displayed and the “clock” indicator will flash.
1. To set the time of day in hours and minutes, press – or +. 5 seconds after the last change, the
“clock” indicator will disappear, confirming the time has been set.
Note:
The clock has a 24-hour display.
Change the time of day (Daylight saving)
1. Press “mode” until the “clock” indicator begins flashing.
2. Press – or + to change the time. 5 seconds after the last change, the “clock” indicator will
disappear, confirming the time has been set.
Setting the timer
1. Press “mode“ until the “timer” indicator begins flashing.
2. Set the countdown time you want by using – and +. 5 seconds after the last change the “timer”
indicator will stop flashing, confirming the timer has been set.
3. To stop the beeper, press –, + or “mode”.
Setting the cooking duration
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature. The oven indicator light will glow and the
heating source will come on.
3. Press “mode“ until the “cook time” indicator begins flashing.
4. Set the cooking duration you want by using – or +. 5 seconds after the last change, the “cook
time” indicator will stop flashing, and the time of day will be displayed.
Note:
Do not forget to add preheating time if necessary.
Setting the cooking end time
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature. The oven indicator light will glow and the
heating source will come on.
3. Press “mode“ until the “end time” indicator begins flashing.
4. Enter the time of day you want to finish cooking by pressing – or +. 5 seconds after the last
change, the “end time” indicator
will stop flashing and the current time of day will be
displayed.
145108 SIMPRD 342-1-541 2/6/08 10:24 AM Page 10
Summary of Contents for GGP475
Page 4: ...4 DESCRIPTION OF YOUR APPLIANCE ...
Page 27: ...27 ...
