Westin PRO TRAXX 4 Series Installation Instructions Download Page 3

Page: 3 / 4

Westin Automotive Products, Inc.

320 W. Covina Blvd

San Dimas, Ca. 91773

Thank you for choosing Westin products

for additional installation assistance please call

Customer Service (800) 793-7846

www.westinautomotive.com

P.N.: 75-212413-RevB

ECO #: W19-0995

DATE: 01/04/19

6. Fasten step bars respectively to either side using the included M10 hardware (9-11). See

Figure 5

7. Align and adjust the step bars as needed and fully tighten all hardware. Torque all M6 fasteners to 5-7 ft-lbs, all M8

fasteners to 15-18 ft-lbs, and all M10 fasteners to 30-35 ft-lbs.

Fig 5

INSTALLATION COMPLETE

Pro Traxx 5 Shown

Summary of Contents for PRO TRAXX 4 Series

Page 1: ...BAR ASSEMBLY 1 DRIVER 1 PASSENGER 10MM SOCKET 3 3 DRIVER MOUNTING BRACKET 10MM WRENCH 4 3 PASSENGER MOUNTING BRACKET 13MM SOCKET 5 6 PLASTIC BRACKET COVER 13MM WRENCH 6 12 M8 HEX HEAD CAP SCREW 16MM S...

Page 2: ...er side remove the rubber plugs located on the rocker panel at each mounting location See Figure 1 3 For models with threaded holes At each bracket mounting location on the rocker panel there should b...

Page 3: ...tinautomotive com P N 75 212413 RevB ECO W19 0995 DATE 01 04 19 6 Fasten step bars respectively to either side using the included M10 hardware 9 11 See Figure 5 7 Align and adjust the step bars as nee...

Page 4: ...products do not require drilling for installation If drilling is defined as required use caution when drilling a vehicle FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN PERSONAL INJURY AND OR IN...