Westfalia SMARTWORKS 880412, Original Instructions Manual

Page: 21 / 26

17
Hints
Before first Use

Remove the device from the packaging. Keep packaging material
out of reach of small children. There is risk of suffocation!

Make sure the mains lead and the mains plug are in a good state:
strong, without ravels or damages.

Caution is advised when using long extension cables.

Do not use the device under moist circumstances.

The metal nozzle gets hot. Watch out and do not touch the nozzle.

Prevent damage of the heating element. Do not lock or block the
nozzle.

Do not leave the device unsupervised when switched on.

When in operation do not point the device at people or animals.

Never look into the hot air nozzle.

Do not use this device in rain, damp surroundings, or near explosive
or flammable products.

Do not use the device on or near very dry spots to avoid fire.

Always remove the plug from the socket when not using the device,
when replacing the nozzle or during maintenance of the device.

Do not point the device at the same place for longer periods of time.

Do not hold the device too close to the surface about to be worked
on as the device can overheat.

Pay attention to the direct/indirect workspace as the heat can ignite
flammable materials, which are close by but not necessarily in view.

Do not allow the hot parts of the device to touch the cord or other
flammable materials.

The device should always be clean, dry and free of grease and oil.

Do not use the device for purposes other than for which it is
intended.

This device operates at a temperature of 600 degrees
without visible signs of this temperature (no flames); still
there is a chance of fire risk. Watch out for the hot air stream
from the nozzle. This air stream can cause burns.