12
Assembling
6. Place the seal (3) on the square exhaust
opening and place the flange (4) on the seal.
7. Attach the flange (4) to the ventilator housing
(6) with the screws (19) the nuts (22) and the
washers (21). Use two washers for each screw.
8. The three support tubes (9) are attached to the
base plate (7) with the screws (16) and the
washers (21). Mount the support tubes in such
way that the upper part is bent to the inside.
9. Use the same type of screw to attach the
collector (11) and the filter bag holder (10) to
the support tube.
10. Before mounting the connecting hose (2), the
two hose clamps (8) must be put onto the
hose.
11. After that, attach the hose to the flanges (4) on
the ventilator housing (6) and the collector (11)
as shown. Secure the hose on the flanges (4)
with the hose clamps (8).
