3
Safety Notes and Using
It is not allowed to use the LED work light in vehicles in the road traffic. If
the work light is used in the road traffic the operating licence will expire.
This operating instruction contains important details for handling the unit.
Please pass the manual on along with the unit if it is handed over to a third
party!
Only qualified personnel are allowed to work on electrical systems in
vehicles. For installing the LED work light observe the regulations and
safety instructions.
Do not alter the LED work light in any way.
If you have to drill holes into the vehicle structure for mounting the LED
work light, make sure not to damage the surface of the vehicle (e. g. corro-
sion). Make sure not to damage cables or supporting parts.
Tighten all screws after adjustment and frequently inspect the unit to make
sure that it is securely attached.
Do not expose the LED work light to oil, grease, dust/dirt, extreme
temperatures, strong vibrations and mechanical stress.
Do not continue to use the work light if the unit becomes damaged. Repair
work must be done by a qualified service technician.
Do not leave packaging material lying around. Plastic bags etc. might
become a deadly toy for small children.
Do not lead the power cord around sharp corners or over hot surfaces.
To avoid danger of fire and personal injuries, operate the work light only
with the protective cover in place and replace a broken cover immediately.
Please note the following safety notes to avoid malfunctions,
damage or physical injury:
